http://www.canadiantechnician.com/forum/index.cfm?forumid=1 FuseTalk Standard Edition http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2402 2010-07-02T01:02:47 -05.00 BradT 1
I'm located in Calgary and selling off a variety of small shop tools left over from a private shop I closed a few years ago. It includes an OTC Vision handheld scope incl. the ignition and lab scope modules, an OTC hub tamer kit and several small hand tools, pullers etc. I'm posting them on Kijiji as well. you can view them by searching ad # 214122302 (the otc scope) and checking the 'veiw posters other ads' link on the right side. At the time of this posting I haven't finished putting everything on so check back to see everything. Call Brad at 403-630-2712 with any questions. ]]> http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2362 2010-03-12T22:13:53 -05.00 Rick 1 http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2349 2010-02-17T19:46:01 -05.00 DanKennedy 2
I need a display card for one.

# G121CB1P00C.

Thanks in advance ]]> http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2343 2010-02-09T14:50:44 -05.00 caliber 3 I have two time clocks for sale.

1, Pyramid Technologies ptr4000, this clock is ideal for attendance and payrole,($500 obo comes with a bunch of cards) Clocks in and clocks out and adds the time. You can check it out here http://www.buyonlinenow.ca/sea...asp?keywords=ptr+4000

2,We have an Amano pix-28 (pro shop), this uses the layered time cards, on the back layer the individual lines can be removed an stuck to the repair order so the service advisor knows how much time was actually spent on each task, then there are multiple copies for administration and for the tech. dusty but have only used approximately 15 cards on it...We use the protractor time clock feature and the techs have access at the bay, so we no longer need it, also comes with a ton of cards $400.00 obo.
http://www.centraltimeclock.com/timestamps/pix28.php

Thank you. ]]> http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2298 2009-12-08T19:52:07 -05.00 Christine33 1
Please PM me for more details ]]> http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2243 2009-09-27T21:02:42 -05.00 Rick 1
Carquest battery charger. like new condition. The model is a cbc 7300, they sell for 329.95 new plus tax. asking 175.00 or bo.

I am also considering selling my otc genesis scan tool with 5 gas analyzer. It has 2007 domestic and import software along with 2005 abs. Please send me an email if you are interested. Thanks, Rick. ]]> http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2193 2009-07-16T14:42:48 -05.00 George 1 http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2171 2009-06-28T08:37:33 -05.00 weslemkoon 1 http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2154 2009-05-31T12:33:39 -05.00 Dave 4 condition,this is a fun project not a concours restoration
other front sheetmetal also welcome , my fenders already have
patches over patches!!

Thanks
Dave
Please Email dtrek@sympatico.ca ]]> http://www.canadiantechnician.com/forum/messageview.cfm?catid=14&threadid=2147 2009-05-26T00:08:44 -05.00 merlinlee 2
Link to pictures:
http://cid-dce3dc6110481c4d.sk...authkey=f2Nz43iP2Mc%24 ]]>